Weihai Hisea CPE135B CM352L

About
The product is no rules structure and thermoplastic elastomer, almost completely no crystallization, has low temperature and plasticizing Mooney viscosity. Processing liquidity is very good, has very good heat resistance, weather resistance, anti-bending, excellent fire resistance,it can be used as halogen rubber alone, and also can be arbitrary proportion mixed and used with CR?CSM ?NBR?SBR?NR and so on. CPE135B widely used in manufacturing the sheath of electric wires and cables, rubber pipe, flame retardant conveyor belt, rubber, packing strip, wire and cables , roof waterproofing materials, and etc.&&

Product Description
SupplierWeihai Hisea Plastic Rubber Co., LTD.
GenericCPE
Material StatusCommercial: Active
FeaturesWeather resistance is good,High liquidity,Flame Characteristics,Heat Resistance, Good
AvailabilitysAsia Pacific

Technical Data
PHYSICALNominal valueUnitTest method
Mooney viscosity45 to 55MUASTM D1646
Chlorine content34.0 to 36.0wt%
Volatiles< 0.50%

THERMALNominal valueUnitTest method
Fusion heat< 2.00J/g

Supplementary informationNominal valueUnitTest method
decomposition temperature> 165

MECHANICALNominal valueUnitTest method
Shore hardness< 56 
tensile strength> 8.50MPa
Tensile strain
fracture> 700%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.