| About |
|---|
| 18881 is a flexible extrusion PVC compound formulated for maximum service temperature of 105°C and intended for tray cable jacketing and riser jacketing applications. |
| Product Description | |
|---|---|
| Supplier | Westlake Chemical |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good flexibility |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.33 to 1.37 | g/cm³ | ASTM D792 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in ultimate elongation in air | |||
| 100°C，96 hr | -49 | % | |
| 136°C，168 hr | -26 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -32.0 | ℃ | ASTM D746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 32 | % | ASTM D2863 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 10 seconds | 85 to 91 | ASTM D2240 | |
| Tensile strength | |||
| — | 17.9 | MPa | |
| 100% strain | 9.65 | MPa | |
| Tensile strain | |||
| fracture | 300 | % | ASTM D638 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |