| About |
|---|
| AXIALLu0027s Georgia Gulf HHP-190 FR NATURAL is a special purpose profile extrusion alloy designed for applications requiring the following properties: Heat Resistance and Thermal Stability Impact Strength and Toughness Colorability Flame Retardant UV Color Stability Dimensional Stability Chemical Resistance |
| Product Description | |
|---|---|
| Supplier | Westlake Chemical |
| Generic | PVC alloy |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good flexibility,High impact resistance,Good Dimensional Stability,Flame Characteristics,High Heat Resistance,Solvent resistance,Heat Stabilized,Good coloring |
| Availabilitys | North America |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 3.2mm | 530 | J/m | ASTM D256 |
| Tensile impact strength | 96.7 | kJ/m² | ASTM D1822 |
| Drop hammer impact | 1.33 | J/m | ASTM D4226 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 96.1 | ℃ | |
| 1.8 MPa, unannealed | 87.8 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | 7.4E-5 | 1/℃ | ASTM D648 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.70 mm | V-1 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 80 | ASTM D2240 | |
| Rockwell hardness | |||
| R-level | 110 | ASTM D785 | |
| Tensile modulus | 2410 | MPa | ASTM D638 |
| Tensile strength (yield) | 46.2 | MPa | ASTM D638 |
| Bending modulus | 2410 | MPa | ASTM D790 |
| bending strength | 76.5 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| Squeezing instructions | Nominal value | Unit | Test method |
| extrusion | Nominal value | Unit | Test method |
| drying temperature | 77 | °C | |
| Drying time | 2.0 to 6.0 | hr | |
| Temperature of material cylinder zone 1 | 149 | °C | |
| Temperature of material cylinder zone 2 | 154 | °C | |
| Temperature of material cylinder zone 3 | 160 | °C | |
| Temperature of material cylinder zone 4 | 166 | °C | |
| Temperature of material cylinder zone 5 | 171 | °C | |
| Joint temperature | 177 | °C | |
| Melt Temperature | 188 to 199 | °C | |
| Mouth temperature | 177 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |