Westlake PVC LSS-8200

About
AXIALLu0027s Georgia Gulf LSS-8200 is a special purpose rigid PVC sheet extrusion compound designed for reduced smoke emission properites.

Product Description
Supplier	Westlake Chemical
Generic	PVC，刚硬
Material Status	Commercial: Active
Features	Low smoke
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.48	g/cm³	ASTM D792

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	64	J/m	ASTM D256
Falling impact resistance	80.1	J/cm	ASTM D4226

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	66.7	℃
1.8 MPa, unannealed	59.4	℃
Linear coefficient of thermal expansion
MD	1.1E-4	1/℃	ASTM D696

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level			UL 94
NBS smoke density
1.98 mm	124	Ds
1.98 mm	32.0	Ds
3.00 mm	206	Ds
3.00 mm	37.0	Ds

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	83		ASTM D2240
Rockwell hardness
R-level	109		ASTM D785
Tensile modulus	2650	MPa	ASTM D638
Tensile strength (yield)	40.8	MPa	ASTM D638
Bending modulus	2820	MPa	ASTM D790
bending strength	73.1	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.