WINDFORM® FX - SOLIAO

About
Technology: Selective Laser Sintering Windform® FX is a new generation polyamide based material, whose repeatability and mechanical characteristics make it particularly suited for Additive Manufacturing applications. White coloured, Windform® FX is characterized by: exceptional resistance and resilience to repeated bending and torsion applications; excellent impact resistance; consistency and behaviour similar to polypropylene and ABS injection moulded parts. Windform® FX is perfect for building accurate, reliable and long lasting prototypes; no further treatments are needed. The powder also benefits from extended recycling and lower refresh rates. Applications: Flexible components, functional parts with living hinges or clip fittings. In addition, ducts of a complex shape, with thin walls, particularly suited for aerospace and motorsport, dashboards and grids, fenders, fans and connectors. Surface Finish: After SLS Process 6 Ra µm After finishing 2 Ra µm&&

About

Technology: Selective Laser Sintering Windform® FX is a new generation polyamide based material, whose repeatability and mechanical characteristics make it particularly suited for Additive Manufacturing applications. White coloured, Windform® FX is characterized by: exceptional resistance and resilience to repeated bending and torsion applications; excellent impact resistance; consistency and behaviour similar to polypropylene and ABS injection moulded parts. Windform® FX is perfect for building accurate, reliable and long lasting prototypes; no further treatments are needed. The powder also benefits from extended recycling and lower refresh rates. Applications: Flexible components, functional parts with living hinges or clip fittings. In addition, ducts of a complex shape, with thin walls, particularly suited for aerospace and motorsport, dashboards and grids, fenders, fans and connectors. Surface Finish: After SLS Process 6 Ra µm After finishing 2 Ra µm&&

Product Description
Generic	PA Not specified
Material Status	Commercial: Active
Features	Good flexibility,High impact resistance,Elastic,Good wear resistance
Availabilitys	North America,Asia Pacific,Europe
Process Methods	3D Printing, Laser Sintering/Melting

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density
20℃	1.03	g/cm³

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1360	MPa	ISO 527-2
per density unit	1320	MPa
tensile strength	49.0	MPa	ISO 527-2
Tensile strain
fracture	44	%	ISO 527-2
Bending modulus	952	MPa	ISO 14125
bending strength	45.0	MPa	ISO 14125
Ultimate Tensile Strength（per density unit）	47.7	MPa/g/cm³

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	3.3	kJ/m²	ISO 179/1eB
Charpy Unnotch Impact strength
23℃	32	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	47.1	℃	ASTM D648
Vicat Softening Temp	187	℃	ASTM D1252 2
Melting temperature	191	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.