Wondel® A AR0G6-S03

About
Wondel® A AR0G6-S03 is a Polyamide 66 (Nylon 66) material filled with 30% glass fiber. It is available in Asia Pacific. Important attributes of Wondel® A AR0G6-S03 are: Flame Rated Flame Retardant&&

Product Description
Supplier	Julong
Generic	PA66
Material Status	Commercial: Active
Features	Flame Characteristics,V-0
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.53	g/cm³	ISO 1183
Shrinkage rate	0.30 to 0.70	%	ISO 294-4
Water absorption rate
23℃，24hr	5.5	%	ISO 62

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	10	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	250	℃	ISO 75-2/B
Melting temperature
DSC	258	℃	ISO 3146

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	> 1.0E+13	ohms	IEC 60093

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	120		ISO 2039-2
tensile strength
yield	150	MPa	ISO 527-2
Tensile strain
fracture	3.0	%	ISO 527-2
bending strength	210	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.