Wondel® P PG8

About
Wondel® P PG8 is a Polypropylene material filled with 40% glass fiber. It is available in Asia Pacific. Primary attribute of Wondel® P PG8: Flame Rated. Typical application of Wondel® P PG8: Automotive&&

Product Description
Supplier	Julong
Generic	PP not specified
Material Status	Commercial: Active
Features	HB
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.23	g/cm³	ISO 1183
Shrinkage rate	0.40 to 0.70	%	ISO 294-4

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	13	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	155	℃	ISO 75-2/B
Melting temperature
DSC	167	℃	ISO 3146

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	> 1.0E+15	ohms	IEC 60093

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	106		ISO 2039-2
tensile strength
yield	90.0	MPa	ISO 527-2
Tensile strain
fracture	3.0	%	ISO 527-2
bending strength	130	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.