| About |
|---|
| Product Description | |
|---|---|
| Supplier | CHI MEI |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 260℃，5.0kg | 24 | g/min | ISO 1133 |
| Density | 1.10 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| bending strength | |||
| 2 mm/min | 75 | MPa | ISO 178 |
| Tensile strain | |||
| 50 mm/min | 60 | % | ISO 527 |
| tensile strength | |||
| 50 mm/min | 50 | MPa | ISO 527 |
| Bending modulus | |||
| 2 mm/mim | 2200 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy impact strength | |||
| 23℃ | 45 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 127 | ℃ | ISO 306 |
| B50 | 109 | ℃ | ISO 306 |
| Hot deformation temperature | |||
| 1.8 MPa | 95 | ℃ | ISO 75 |
| 0.46 MPa, unannealed | 105 | ℃ | ISO 75-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |