| About |
|---|
| WONDERLOY® PC-540是一种聚碳酸酯+丙烯腈丁二烯苯乙烯(PC+ABS)产品,。 它可以通过注射成型进行加工,在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货。 特性包括: 阻燃/额定火焰 通过 ROHS 认证 Flame Retardant 无卤素&& |
| Product Description | |
|---|---|
| Supplier | CHI MEI |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Halogen free,Flame Characteristics |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD：2.0 mm | 0.50 | % | ASTM D995 |
| Water absorption rate | |||
| 23℃，24hr | 0.40 | % | ASTM D570 |
| Melt Flow Rate | |||
| 260℃，2.16kg | 23.50 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 92.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | |||
| 107 | ℃ | ASTM D1525 | |
| Linear coefficient of thermal expansion | |||
| MD | 8.0E-5 | 1/℃ | ASTM D696 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.75mm | HB | UL-94 | |
| 0.80mm | V-2 | UL 94 | |
| 1.50mm | V-0 | UL 94 | |
| 2.00mm | V-0，5VB | UL 94 | |
| 3.00mm | V-0，5VB | UL 94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 640 | J/m | ASTM D256 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | 118 | R 级 | ASTM D785 |
| tensile strength | |||
| 23℃ | 58.80 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 100 | % | ASTM D638 |
| bending strength | |||
| 23℃ | 89.20 | MPa | ASTM D790 |
| Bending modulus | |||
| 23℃ | 2460 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 80 -100 | °C | |
| Drying time | 4.0 | Hr | |
| Injection temperature | |||
| Temperature at the rear of the screw barrel | 210-250 | °C | |
| Temperature in the middle of the screw barrel | 220-260 | °C | |
| Front temperature of screw barrel | 230-270 | °C | |
| Mold head temperature | 230-270 | °C | |
| Mold temperature | 50-100 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |