| About |
|---|
| Product Description | |
|---|---|
| Supplier | CHI MEI |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Flame Characteristics |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 260℃，5.0kg | 18 | g/10min | ASTM D1238 |
| Density | |||
| 23℃ | 1.18 | g/cm³ | ASTM D792 |
| Shrinkage rate | 0.4~0.6 | % | ASTM D955 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| bending strength | |||
| 28 mm/min | 78.45 | Mpa | ASTM D790 |
| Tensile strain | |||
| 6 mm/min | 80 | % | ASTM D638 |
| tensile strength | |||
| 6 mm/min | 58.84 | Mpa | ASTM D638 |
| Rockwell hardness | 120 | R 级 | ASTM D785 |
| Bending modulus | |||
| 28 mm/min | 2451.66 | Mpa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 411.76 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 105 | ℃ | ASTM D1525 |
| Hot deformation temperature | |||
| 120°C/hr | 80 | ℃ | ASTM D648 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |