| About |
|---|
| Product Description | |
|---|---|
| Supplier | Yiweiyuan |
| Generic | PC+ABS |
| Material Status | Commercial: Negative |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt index | |||
| 260℃,5kg | 20 | g/10min | ASTM D1238 |
| Density | |||
| 23℃ | 1.1 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 50mm/min | 50 | MPa | ASTM D638 |
| elongation at break | |||
| 50mm/min | 80 | % | ASTM D638 |
| bending strength | |||
| 2mm/min | 76 | MPa | ASTM D790 |
| Bending modulus | |||
| 2mm/min | 2300 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | |||
| 3.2 mm,23℃ | 55 | Kj/m² | ASTM D-256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| 1kg,50℃/hr | 127 | ℃ | ASTM D1525 |
| Hot deformation temperature | |||
| 1.82MPa,120℃/hr | 97 | ℃ | ASTM D648 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |