| About |
|---|
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PC+PBT |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High impact resistance,Solvent resistance,HB |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ASTM D792 |
| Density | 1.22 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 250℃，5.0kg | 9.6 | g/10min | ASTM D1238 |
| 250℃，5.0kg | 8.0 | g/10min | ISO 1133 |
| Shrinkage rate | |||
| TD：3.2 mm | 0.65 to 0.73 | % | Internal Method |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.28 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 0.080 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2370 | MPa | ASTM D638 |
| Tensile modulus | 2330 | MPa | ISO 527-1-2 |
| tensile strength | |||
| fracture | 57 | MPa | ISO 527-2/50 |
| fracture | 60 | MPa | ASTM D638 |
| yield | 60 | MPa | ASTM D638 |
| yield | 60 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| fracture | 108 | % | ASTM D638 |
| fracture | 104 | % | ISO 527-2/50 |
| yield | 5.0 | % | ISO 527-2/50 |
| yield | 5.6 | % | ASTM D638 |
| Tensile modulus | |||
| 50 mm span | 2370 | MPa | ASTM D790 |
| bending strength | 92.0 | MPa | ISO 178 |
| Bending modulus | 2120 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 65 | kJ/m² | ISO 179/1eA |
| -30℃ | 13 | kJ/m² | ISO 179/1eA |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30℃ | 176 | J/m | ASTM D256 |
| 23℃ | 814 | J/m | ASTM D256 |
| Impact strength of cantilever beam notch | ISO 180/1A | ||
| -30℃ | 16 | kJ/m² | ISO 180-1A |
| 23℃ | 59 | kJ/m² | ISO 180-1A |
| Dart impact equipped with measuring instruments | ASTM D3763 | ||
| 23℃，Total Energy | 58 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed, 64 mm span | 116 | ℃ | ISO 75-2/Bf |
| 0.45 MPa, unannealed, 3.2 mm | 110 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 6.4 mm | 120 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 64 mm span | 98.0 | ℃ | ISO 75-2/Af |
| 1.8 MPa, unannealed, 3.2 mm | 92.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 6.4 mm | 105 | ℃ | ASTM D648 |
| Vicat Softening Temp | |||
| B50 | 130 | ℃ | ISO 306 |
| B120 | 131 | ℃ | ISO 306 |
| B50 | 130 | ℃ | ASTM D1525 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |