| About |
|---|
| XENOY X4850 is a hydrostable, high modulus, high ductile PC/PBT blend. Furthermore, this resin provides high chemicalresistance, very low creep, low CTE, excellent fatique and high heat dimensional stability. The X4850 could be positioned for body panels, safety equipment,housings, doorhandles, spring-loaded applications, medical device enclosures, outdoor sports equipment.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PC+PBT |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good Dimensional Stability,Ductility,Hydrolysis stability,Fatigue resistance,Solvent resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.31 | g/cm³ | ASTM D792 |
| Density | 1.31 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 266℃，5.0kg | 4.5 | g/10min | ASTM D1238 |
| Melt Volume Rate | |||
| 265℃，5 kg | 4.00 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.70 to 0.90 | % | Internal Method |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.42 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 0.14 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | 11 | kJ/m² | ISO 179/1eA |
| 23℃ | 20 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | No Break | ISO 179/1eU | |
| 23℃ | No Break | ISO 179/1eU | |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30℃ | 100 | J/m | ASTM D256 |
| 0℃ | 120 | J/m | ASTM D256 |
| 23℃ | 180 | J/m | ASTM D256 |
| Impact strength of cantilever beam notch | ISO 180/1A | ||
| -30℃ | 7.0 | kJ/m² | ISO 180-1A |
| 0℃ | 11 | kJ/m² | ISO 180-1A |
| 23℃ | 20 | kJ/m² | ISO 180-1A |
| Notched impact strength of cantilever beam | ISO 180/1U | ||
| -30℃ | No Break | ISO 180/1U | |
| 23℃ | No Break | ISO 180/1U | |
| Dart impact equipped with measuring instruments | ASTM D3763 | ||
| -20℃，Total Energy | 60.0 | J | ASTM D3763 |
| 23℃，Total Energy | 60.0 | J | ASTM D3763 |
| Multi axial instrumented impact energy | 100 | J | ISO 6603-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 64 mm span | 99.0 | ℃ | ISO 75-2/Af |
| 1.8 MPa, unannealed, 3.2 mm | 101 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 64 mm span | 121 | ℃ | ISO 75-2/Bf |
| 0.45 MPa, unannealed, 3.2 mm | 125 | ℃ | ASTM D648 |
| Vicat Softening Temp | 134 | ℃ | ASTM D1525 11 |
| Vicat Softening Temp | |||
| B50 | 133 | ℃ | ISO 306 |
| B120 | 135 | ℃ | ISO 306 |
| Linear coefficient of thermal expansion | |||
| TD：-40~40℃ | 7.5E-5 | 1/℃ | ASTM E831 |
| TD：-30~80℃ | 8.1E-5 | 1/℃ | ISO 11359-2 |
| MD：-40~40℃ | 5.2E-5 | 1/℃ | ASTM E831 |
| MD：-30~80℃ | 6.3E-5 | 1/℃ | ISO 11359-2 |
| Thermal conductivity coefficient | 0.20 | W/m/K | ISO 8302 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 4000 | MPa | ASTM D638 |
| Tensile modulus | |||
| — | 3850 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 58.0 | MPa | ASTM D638 |
| yield | 65.0 | MPa | ASTM D638 |
| yield | 58.0 | MPa | ISO 527-2/5 |
| yield | 63.0 | MPa | ISO 527-2/50 |
| tensile strength | |||
| fracture | 60.0 | MPa | ASTM D638 |
| fracture | 55.0 | MPa | ASTM D638 |
| fracture | 50.0 | MPa | ISO 527-2/5 |
| fracture | 45.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 3.4 | % | ISO 527-2/5 |
| yield | 3.5 | % | ISO 527-2/50 |
| yield | 3.8 | % | ASTM D638 |
| yield | 3.7 | % | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| fracture | 140 | % | ASTM D638 |
| fracture | 130 | % | ASTM D638 |
| fracture | 80 | % | ISO 527-2/5 |
| fracture | 30 | % | ISO 527-2/50 |
| Bending modulus | 3500 | MPa | ISO 178 |
| 50 mm span | 3700 | MPa | ASTM D790 |
| bending strength | 94.0 | MPa | ISO 178 |
| bending strength | |||
| Yield, 50 mm span | 99.0 | MPa | ASTM D790 |
| Taber abraser | |||
| 1000 cycles, 1000 g, CS-17 wheels | 30.0 | mg | Internal Method |
| Ball hardness | |||
| H358/30 | 105 | MPa | ISO 2039-1 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 90 to 100 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Hopper temperature | 40 to 60 | °C | |
| Barrel rear temperature | 230 to 250 | °C | |
| Barrel middle temperature | 240 to 265 | °C | |
| Barrel front temperature | 250 to 270 | °C | |
| Nozzle temperature | 250 to 265 | °C | |
| Processing (melt) temperature | 255 to 270 | °C | |
| Mold temperature | 60 to 80 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. Type I, 2.0 in/min |
| 4. Type I, 0.20 in/min |
| 5. 0.051 in/min |
| 6. 0.079 in/min |
| 7. Yield |
| 8. 80*10*4 sp=62mm |
| 9. 80*10*4 |
| 10. 80*10*4 mm |
| 11. Rate B (120°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |