XIRAN® SZ23110

About
XIRAN® SZ23110 is an amorphous thermoplastic random SMA (styrene maleic anhydride) copolymer. XIRAN® SZ23110 is typically added to other engineering plastics to increase: thermal stability dimensional stability surface adhesion properties Application areas XIRAN® SZ23110 is specifically designed to be used in automotive interior application in combination with impact modifier (ABS) and optional glass fiber reinforcement.&&

About

XIRAN® SZ23110 is an amorphous thermoplastic random SMA (styrene maleic anhydride) copolymer. XIRAN® SZ23110 is typically added to other engineering plastics to increase: thermal stability dimensional stability surface adhesion properties Application areas XIRAN® SZ23110 is specifically designed to be used in automotive interior application in combination with impact modifier (ABS) and optional glass fiber reinforcement.&&

Product Description
Generic	Styrene-maleic anhydride copolymer
Material Status	Commercial: Active
Features	Good Dimensional Stability,Good bond,Copolymer,Heat Stabilized,Amorphous
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.15	g/cm³	ISO 1183
Apparent density	0.60	g/cm³	Internal Method
Maleic anhydride content	23	%	Internal Method
water content	< 2000	ppm	ISO 760
molecular weight	110000	g/mol	Internal Method

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	150	℃	ISO 3146
Vicat Softening Temp	145	℃	ISO 306

Supplementary information	Nominal value	Unit	Test method
Particle size	4.00	mm
Polydispersity（Mw/Mn）	2.50		ISO 13885-1
Vinyl diffusion meter	< 1500	ppm	GC

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Drying temperature	80 to 90	°C
Drying time	2.0 to 3.0	hr
Barrel rear temperature	230 to 250	°C
Barrel middle temperature	230 to 250	°C
Barrel front temperature	230 to 250	°C
Processing (melt) temperature	< 280	°C
Drying temperature	80 to 90	°C
Drying time	2.0 to 3.0	hr
Barrel 1 zone temperature	230 to 250	°C
Barrel 2 zone temperature	230 to 250	°C
Barrel 3 zone temperature	230 to 250	°C
Barrel 4 zone temperature	230 to 250	°C
Barrel 5 zone temperature	230 to 250	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.