XSTRAND™ GF30-PP

About
Developed by Owens Corning, a world leader in composite solutions, XSTRAND™ GF30-PP filament for 3D printing is a reinforced material designed to be compatible with any standard Fused Filament Fabrication 3D printer (1.75 and 2.85 mm diameters available). Benefits Very high stiffness and strength (up to +200% compare ABS) Large operational temperature range (-20°C to 120°C) Very good chemical and UV resistance Very low moisture absorption Excellent layer adhesion Reduced warping effect compared to neat PP Potential Applications XSTRAND™ GF30-PP is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports u0026amp; leisure…

About

Developed by Owens Corning, a world leader in composite solutions, XSTRAND™ GF30-PP filament for 3D printing is a reinforced material designed to be compatible with any standard Fused Filament Fabrication 3D printer (1.75 and 2.85 mm diameters available). Benefits Very high stiffness and strength (up to +200% compare ABS) Large operational temperature range (-20°C to 120°C) Very good chemical and UV resistance Very low moisture absorption Excellent layer adhesion Reduced warping effect compared to neat PP Potential Applications XSTRAND™ GF30-PP is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports u0026amp; leisure…

Product Description
Supplier	BASF
Generic	PP not specified
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,High elastic,Antifreeze,Good bond,Heat Resistance, Good,Solvent resistance,Low moisture absorption
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ISO 1183/A
Water absorption rate
Saturation, 23 ℃	< 0.10	%
Equilibrium, 23 ℃, 50% RH	< 0.10	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	6500	MPa	ISO 527-1-2
Tensile stress
yield	60.0	MPa
fracture	60.0	MPa
Tensile strain
fracture	1.6	%	ISO 527-2/1
Bending modulus	4300	MPa	ISO 178
bending strength
yield	83.0	MPa
fracture	78.0	MPa

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	120	℃	ISO 75-2/A
Melting temperature	167	℃	ISO 11357-3

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.