| About |
|---|
| Xuchuan A-9003/B-6280 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It is available in Asia Pacific. Typical application: Consumer Goods. Characteristics include: Good Aesthetics Good Flexibility High Hardness&& |
| Product Description | |
|---|---|
| Supplier | Xuchuan |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good surface appearance,Good Hardness |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.450 to 0.600 | g/cm³ | |
| Density | |||
| A-9003：40℃ | 1.010 to 1.020 | g/cm³ | |
| B-6280：40℃ | 1.080 to 1.200 | g/cm³ | |
| viscosity | |||
| A-9003，40℃ | 1.00 to 1.40 | Pa·s | |
| B-6280，40℃ | 0.700 to 1.10 | Pa·s | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 4.00 to 6.00 | MPa | |
| Tensile strain | |||
| fracture | 300 to 400 | % | |
| tear strength | 21.0 to 30.0 | kN/m |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 100 | ||
| Component B | 按重量计算的混合比: 120 | ||
| stripping time | 5.0 to 7.0 | min | |
| Cream Time | 6.0 to 8.0 | sec | |
| End of Rise Time | 30.0 to 40.0 | sec |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Free Rise Foam Density | 0.210 to 0.260 | g/cm³ | |
| Preheating temperature | |||
| Part A | 50 to 60 | ℃ | |
| Part B | 50 to 60 | ℃ | |
| Preheating time | |||
| Part A | 6.0 to 8.0 | hr | |
| Part B | 8.0 to 12.0 | hr | |
| Processing temperature | |||
| Part A | 40 to 45 | ℃ | |
| Part B | 38 to 42 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 72 to 85 | ||
| Williams Abrasion | 150 to 240 | cc/php |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Mold temperature | 45 to 55 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |