| About |
|---|
| XYRON™ S201A is a Polyphenylene Ether (PPE) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, or North America.&& |
| Product Description | |
|---|---|
| Supplier | Asahi Kasei |
| Generic | PPO(PPE) |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.06 | g/cm³ | |
| Apparent density | 0.40 to 0.50 | g/cm³ | |
| Viscosity value | |||
| Reduced viscosity, 30 ℃ | 52.0 | ml/g | |
| Average particle size | 200.0 to 400.0 | µm | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 214 | ℃ | DSC |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.5 g/dl-PPE in CHCl3 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |