Yanshan PE 7000F

About
Yanshan PE 7000F is a High Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific. Applications of Yanshan PE 7000F include bags/liners and film.&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.96	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.04	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
23℃	31.4	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	500	%	ASTM D638
Bending modulus
23℃	981	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
	124	℃	ASTM D1525

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	NB	J/m	ASTM D256

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.