Yanshan PE LD605

About
Yanshan PE LD605 is a Low Density Polyethylene product. It can be processed by film extrusion or injection molding and is available in Asia Pacific. Typical application: Film.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.922	g/cm³	ASTM D1505
Melt Flow Rate	6.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	8.00	MPa	ASTM D638
Tensile strain
fracture	100	%	ASTM D638

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	86.0	℃	ASTM D1525

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.