| About |
|---|
| Product Description | |
|---|---|
| Generic | PA6 |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | 58.9 | MPa | |
| bending strength | 90.6 | MPa | |
| Bending modulus | 2153 | MPa | |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| elongation | |||
| fracture | 80 | % | |
| hardness | 63.6 | R | |
| Forming shrinkage rate | 1.34 | % | |
| Density | 1.156 | g/cm³ | |
| water content | ＜0.3 | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notch impact strength | 12.1 | KJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 215-220 | ℃ | |
| Hot deformation temperature | 73.7 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | 0.67 |
| POLYMER PROPERTIES | Nominal value | Unit | Test method |
|---|---|---|---|
| viscosity | 2.42±0.03 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |