YUCLAIR® CA100

About
YUCLAIR CA100 is 1-Butene copolymer LLDPE. Good mechanical and thermal properties make these resin an ideal choice for extrusion coating. YUCLAIR CA100 has better processibility with LDPE blending.&&

Product Description
Supplier	SKC
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Copolymer,Butylene copolymer
Availabilitys	North America,Asia Pacific,Europe

Technical Data
film	Nominal value	Unit	Test method
Tensile strain
MD, fracture	600	%	ASTM D882

PHYSICAL	Nominal value	Unit	Test method
Density	0.919	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	7.0	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -70.0	℃	ASTM D746
Vicat Softening Temp	88.0	℃	ASTM D1525

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.