| About |
|---|
| YUCLAIR FG400 is butene-1 copolymer designed for use in food wrap film application. YUCLAIR FG400 provides stronger film than ones made from competitive LLDPE film grades. Therefore YUCLAIR FG400 shows superior tensile strength, tear strength, gel-free, cling property. Outstanding clarity and good processibility make this resin an ideal choice for film application when blended with conventional LDPE. YUCLAIR FG400 can be processed readily into blown film using standard extrusion techniques. YUCLAIR FG400 complies with FDA regulations in 21 CFR177.1520 for all food contact.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Food contact compliance,Good Tensile Strength,Good tear strength,High adhesion degrees,Copolymer,Butylene copolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 50 | µm | |
| tensile strength | ASTM D882 | ||
| MD, yield, 50 µ m | 11.8 | MPa | ASTM D882 |
| TD, yield, 50 µ m | 10.8 | MPa | ASTM D882 |
| MD, fracture, 50 µ m | 42.2 | MPa | ASTM D882 |
| TD, fracture, 50 µ m | 35.3 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 50 µ m | 750 | % | ASTM D882 |
| TD, fracture, 50 µ m | 850 | % | ASTM D882 |
| Spencer Impact | |||
| 50.0 µm | 0.981 | J | ASTM D3420 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -70.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 102 | ℃ | ASTM D1525 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 17 | % | ASTM D1003 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | ASTM D1922 | ||
| MD | 49.0 | kN/m | ASTM D1922 |
| TD | 117.7 | kN/m | ASTM D1922 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |