| About |
|---|
| YUCLAIR WE100 is 1-Butene copolymer. Good processibility make these resin an ideal choice for wire & cable. YUCLAIR WE100 contains metal deactivator. YUCLAIR WE100 has better processibility and physical properties than any other LLDPEs for W&C. Application / Use Case: wire & cable / jacket for cable and wire&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.8 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | > 1000 | hr | ASTM D1693 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D882 | ||
| MD, yield | 9.90 | MPa | ASTM D882 |
| MD, fracture | 20.8 | MPa | ASTM D882 |
| Tensile strain | |||
| MD, fracture | 790 | % | ASTM D882 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -100 | ℃ | ASTM D746 |
| Vicat Softening Temp | 102 | ℃ | ASTM D1525 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | > 1.0E+16 | ohms·cm | ASTM D257 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |