| About |
|---|
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PP homopolymerization |
| Material Status | Commercial: Negative |
| Features | Low warping,Gamma radiation,High liquidity,Good surface appearance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Index | 35 | g/10min | ISO 1133 |
| Density | 0.90 | g/cm³ | ISO 1183 |
| Shrinkage rate | 1.3-1.7 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Yield yld | 350 | kg/cm² | ISO 527 |
| Elongation at Break | 500 | % | ISO 527 |
| Flexural Modulus | 15000 | kg/cm² | ISO 178 |
| Rockwell hardness | 108 | R Scale | ISO 2039 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Impact strength of cantilever beam | |||
| 23℃ | 4.0 | Kg.cm/cm | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temperature | 150 | ℃ | ISO 306 |
| Hot deformation temperature HDT | 125 | ℃ | ISO 75 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |