| About |
|---|
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Solvent resistance |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Melt index | 18 | g/10min | ISO 1133 |
| melting point | 146 | ℃ | DSC |
| Hot deformation temperature | 95 | ℃ | ISO 75 |
| Vicat Softening Temp | 130 | ℃ | ISO 306 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Lowering point tensile strength | 28.5 | MPa | ISO527 |
| Across Flow | 500 | % | ISO527 |
| Rockwell hardness | 98 | % | ISO 2039 |
| Bending modulus | 1029 | MPa | ISO178 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shrinkage rate | 1.3-1.7 | % | FPC Method |
| Density | 0.09 | g/cm³ | ISO 1183 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 69 | J/m | ISO 180 |
| -20℃ | – | ISO 180 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |