YUNGSOX® PP 1005

About
YUNGSOX® PP 1005 is a Polypropylene Homopolymer (PP Homopolymer) material. It is available in Asia Pacific for blow molding, pipe extrusion, or thermoforming. Primary attribute of YUNGSOX® PP 1005: Homopolymer. Typical applications include: Food Contact Applications Plumbing/Piping/Potable Water Sheet&&

Product Description
Supplier	fpc-tw
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good dissection,Good melt strength,Homopolymer
Availabilitys	Asia Pacific
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Shrinkage rate
MD：2.0 mm	1.50	%	ISO 294-4
Melt Flow Rate
230℃，2.16kg	0.50	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	115	℃	ISO 75-2/Af
Vicat Softening Temp
A50	152	℃	ISO 306/A50

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.59 mm	HB		UL-94

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	88	kJ/m²	ISO 180-1A

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness	105	R 级	ISO 2039-2
tensile strength
23℃	34.3	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	300	%	ISO 527-2
Bending modulus
23℃	1320	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion molding conditions	Nominal value	Unit	Test method
Injection temperature
Mold temperature	30-50	°C
Die temperature	190-210	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.