| About |
|---|
| YUNTIANHUA® GF-10 is an Acetal (POM) Copolymer product filled with 10% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of YUNTIANHUA® GF-10 include engineering/industrial parts, automotive and conveyors. Characteristics include: Flame Rated Copolymer Creep Resistant Fatigue Resistant Heat Resistant&& |
| Product Description | |
|---|---|
| Supplier | YunTianHua |
| Generic | Copolymer Polyformaldehyde |
| Material Status | Commercial: Negative |
| Features | Good Rigidity,Good flexibility,Low contractility,High Heat Resistance,Fatigue resistance,Copolymer,HB |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.50 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 6.0 | g/10min | ISO 1133 |
| Water absorption rate | |||
| 23℃，24hr | 0.60 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 4500 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 90.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 3.5 | % | ISO 527-2 |
| Bending modulus | 4000 | MPa | ISO 178 |
| bending strength | 100 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.0 | kJ/m² | ISO 179-1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 155 | ℃ | ISO 75-2/A |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 100 to 120 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Barrel rear temperature | 160 to 180 | °C | |
| Barrel middle temperature | 170 to 200 | °C | |
| Barrel front temperature | 180 to 210 | °C | |
| Nozzle temperature | 180 to 210 | °C | |
| Processing (melt) temperature | 180 to 210 | °C | |
| Mold temperature | 60 to 90 | °C | |
| Injection pressure | 50.0 to 100 | MPa | |
| Hold pressure | 30.0 to 80.0 | MPa | |
| Back pressure | 0.00 to 0.500 | MPa | |
| Screw speed | 50 to 120 | rpm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |