| About |
|---|
| YUPLENE B330F is a propylene impact copolymer designed for injection molding applications. YUPLENE B330F has excellent toughness, good dimensional stability and has been listed by Underwriters Laboratories (UL). YUPLENE B330F is suitable for household articles, chairs, containers and automobile parts. YUPLENE B330F complies with FDA regulation 21 CFR177.1520.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Good flexibility,High impact resistance,Good Dimensional Stability,Impact copolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.5 | g/10min | ASTM D1238 |
| Spiral flow length | 55.0 | cm | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -20℃ | 39 | J/m | ASTM D256 |
| 23℃ | 160 | J/m | ASTM D256 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Accelerate oven aging | |||
| In the air, 150 ℃ | 15.0 | day | ASTM D3012 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 150 | ℃ | ASTM D1525 |
| Hot deformation temperature | 110 | ℃ | ASTM D648 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| DuPont Impact Strength（-10℃） | > 2.94 | J | ASTM D2794 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 85 | ASTM D785 | |
| tensile strength | |||
| yield | 26.5 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 500 | % | ASTM D638 |
| Bending modulus | 1180 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |