| About |
|---|
| YUPLENE B920F is an impact propylene copolymer designed for injection molding and extrusion applications. YUPLENE B920F has excellent properties in impact strength as well as stiffness, flow, mechanical properties and dimensional stability, which make YUPLENE B920F suitable for auto parts, electric appliances, containers, and injection applications.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.5 | g/10min | ASTM D1238 |
| Spiral flow length | 50.0 | cm | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 250 | J/m | ASTM D256 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Oven Aging | |||
| In the air, 150 ℃ | 15.0 | day | ASTM D3012 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 150 | ℃ | ASTM D1525 |
| Hot deformation temperature | 110 | ℃ | ASTM D648 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| DuPont Impact Strength | > 1.96 | J | ASTM D2794 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 85 | ASTM D785 | |
| tensile strength | |||
| yield | 27.5 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 500 | % | ASTM D638 |
| Bending modulus | 1370 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |