| About |
|---|
| YUPLENE R520Y is propylene random copolymer designed for use in blow molding, and ISBM (Injection stretch blow molding). YUPLENE R520Y offers high Vicat softening point, low temperature toughness and excellent clearity. YUPLENE R520Y complies with FDA regulation 21 CFR177.1520 for all food contact.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good surface appearance,Food contact compliance,Random copolymer,Low temperature toughness |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 1.8 | g/10min | ASTM D1238 |
| Spiral flow length | 50.0 | cm | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 93 | J/m | ASTM D256 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Accelerate oven aging | |||
| In the air, 150 ℃ | 15.0 | day | ASTM D3012 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 140 | ℃ | ASTM D1525 |
| Hot deformation temperature | 82 | ℃ | ASTM D648 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | < 15 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 80 | ASTM D785 | |
| tensile strength | |||
| yield | 31.4 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 500 | % | ASTM D638 |
| Bending modulus | 1370 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |