YUPLENE® RX3600

About
YUPLENE RX3600 is propylene random copolymer that is made for injection molding. It has excellent impact strength as well as excellent transparency. Since it has high fluidity and dimensional stability, it can be used for food packaging, packaging container and various home appliances. YUPLENE RX3600 is suitable for application which needs high impact strength such as cold chain system. YUPLENE RX3600 complies with FDA regulation 21 CFR 177.1520 for the exposure to food.&&

About

YUPLENE RX3600 is propylene random copolymer that is made for injection molding. It has excellent impact strength as well as excellent transparency. Since it has high fluidity and dimensional stability, it can be used for food packaging, packaging container and various home appliances. YUPLENE RX3600 is suitable for application which needs high impact strength such as cold chain system. YUPLENE RX3600 complies with FDA regulation 21 CFR 177.1520 for the exposure to food.&&

Product Description
Supplier	SKC
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good surface appearance,High impact resistance,Good Dimensional Stability,Good liquidity,Food contact compliance,Random copolymer
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	18	g/10min	ASTM D1238
Spiral flow length	> 80.0	cm

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	130	J/m	ASTM D256

Aging performance	Nominal value	Unit	Test method
Oven Aging
In the air, 150 ℃	15.0	day	ASTM D3012

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	125	℃	ASTM D1525
Hot deformation temperature	80	℃	ASTM D648

optical performance	Nominal value	Unit	Test method
Haze	< 10	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	72		ASTM D785
tensile strength
yield	24.5	MPa	ASTM D638
Tensile strain
fracture	> 500	%	ASTM D638
Bending modulus	1080	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.