| About |
|---|
| Yuyao PC PC302 is a Polycarbonate (PC) product filled with 10% glass fiber. It can be processed by injection molding and is available in Asia Pacific. Applications of Yuyao PC PC302 include appliances, automotive, business/office goods and electrical/electronic applications. Characteristics include: Flame Rated Flame Retardant Good Dimensional Stability Good Toughness Halogen Free&& |
| Product Description | |
|---|---|
| Supplier | Tenglong |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good Dimensional Stability,Halogen free,Flame Characteristics,High Heat Resistance,Insulation,V-1 |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.32 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.20 to 0.30 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 105 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 5.0 | % | ASTM D638 |
| Bending modulus | 4000 | MPa | ASTM D790 |
| bending strength | 130 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 13.0 | kJ/m² | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 145 | ℃ | ASTM D648 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 4.0E+16 | ohms·cm | ASTM D257 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.60 mm | V-1 | UL 94 | |
| 3.20 mm | V-1 | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 105 to 110 | °C | |
| Drying time | 4.0 to 5.0 | hr | |
| Processing (melt) temperature | 210 to 255 | °C | |
| Mold temperature | 60 to 80 | °C | |
| Injection pressure | 70.0 to 100 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |