Zelux® SD-P - SOLIAO

About
ZELUX® SD-P (Static-dissipative Polycarbonate) Carbon-powder-filled material with resistivity levels in the 1E7 – 1E11 range with high flexural strength and good thermal stability to 270° F. UL94 V-O rated at 0.030 in, this material is thermoformable in 0.010″ – 0.060″ gauges, and has low outgassing properties. Advantages: Consistent resistivity values Low outgassing UL 94 V-0 flame rating High strength Easily machined Durable Applications: Semiconductor/electronic components Cassette housings Telecommunications hardware Explosives handling equipment&&

About

ZELUX® SD-P (Static-dissipative Polycarbonate) Carbon-powder-filled material with resistivity levels in the 1E7 – 1E11 range with high flexural strength and good thermal stability to 270° F. UL94 V-O rated at 0.030 in, this material is thermoformable in 0.010″ – 0.060″ gauges, and has low outgassing properties. Advantages: Consistent resistivity values Low outgassing UL 94 V-0 flame rating High strength Easily machined Durable Applications: Semiconductor/electronic components Cassette housings Telecommunications hardware Explosives handling equipment&&

Product Description
Supplier	Westlake Plastics
Generic	Polycarbonate
Material Status	Commercial: Active
Features	Good Rigidity,Conductive,Machinable,Low odor,Durability,Antistatic property,Heat Stabilized,V-0
Availabilitys	North America
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.33	g/cm³	ASTM D792
Water absorption rate
24hr	0.18	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	80	J/m	ASTM D256
Notched impact strength of cantilever beam	800	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	132	℃	ASTM D648
Linear coefficient of thermal expansion
MD	6.3E-5	1/℃	ASTM D696
Thermal conductivity coefficient	0.23	W/m/K	ASTM C177

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+7 to 1.0E+11	ohms	ASTM D257
Volume resistivity	1.0E+7 to 1.0E+11	ohms·cm	ASTM D257
Electrostatic attenuation		sec	MIL B-81705

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
0.508 mm	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	78		ASTM D2240
tensile strength
yield	65.5	MPa	ASTM D638
Tensile strain
fracture	5.0	%	ASTM D638
Bending modulus	3100	MPa	ASTM D790
bending strength	107	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.