| About |
|---|
| Zylar® 960 is an impact modified styrene acrylic copolymer that provides toughness equivalent to some grades of polycarbonate, good clarity and superior processing characteristics for demanding injection molded applications. FEATURES Exceptional toughness Low density Ease of processing Gamma & ETO sterilizable Meets USP XXIII specifications for Class VI plastics APPLICATIONS Appliances and consumer goods Medical devices Toys Office accessories Industrial housings and covers&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | MMBS |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good flexibility,High impact resistance,Low density,Radiation disinfection,Copolymer,Ethylene oxide disinfection |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 6.0 | g/10min | ASTM D1238 |
| Melt Volume Rate | ISO 1133 | ||
| 200℃，5 kg | 6.00 | cm³/10min | |
| 220℃，10 kg | 65.0 | cm³/10min | |
| Shrinkage rate | |||
| MD | 0.20 to 0.60 | % | ASTM D955 |
| — | 0.20 to 0.60 | % | ISO 294-4 |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.10 | % | ASTM D570，ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 16 | kJ/m² | ISO 179 |
| Charpy Unnotch Impact strength | |||
| 23℃ | 无断裂 | ISO 179 | |
| Impact strength of cantilever beam notch | |||
| 23℃ | 590 | J/m | ASTM D256 |
| 23℃ | 15 | kJ/m² | ISO 180-A |
| Notched impact strength of cantilever beam | 200 | kJ/m² | ISO 180 |
| Drop hammer impact | 19.2 | J | ASTM D5420 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, annealed | 78.0 | ℃ | ISO 75-2/B |
| 1.8 MPa, annealed | 86.1 | ℃ | ISO 75-2/B |
| 1.8 MPa, annealed | 67.0 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | |||
| — | 93.9 | ℃ | ASTM D1525 1 |
| B50 | 60.0 | ℃ | ISO 306 |
| Maximum operating temperature | 250 | ℃ |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | |||
| — | 1.570 | ASTM D542 | |
| — | 1.560 | ISO 489 | |
| Transmittance | |||
| 550 nm | 91.0 | % | ASTM D1003 |
| Haze | 2.0 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 62 | ASTM D785 | |
| R-level | 62 | ISO 2039-2 | |
| Ball hardness | 35.0 | MPa | ISO 2039-1 |
| Tensile modulus | |||
| — | 1720 | MPa | ASTM D638 |
| — | 1640 | MPa | ISO 527-2 |
| tensile strength | |||
| Yield, 23 ℃ | 23.4 | MPa | ASTM D638 |
| Yield, 23 ℃ | 28.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 70 | % | ASTM D638 |
| Fracture, 23 ℃ | 120 | % | ISO 527-2 |
| Bending modulus | |||
| — | 1720 | MPa | ASTM D790 |
| — | 1640 | MPa | ISO 178 |
| bending strength | |||
| — | 42.7 | MPa | ASTM D790 |
| — | 45.0 | MPa | ISO 178 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 65.0 | °C | |
| Drying time | 2.0 | hr | |
| Barrel rear temperature | 190 to 220 | °C | |
| Barrel middle temperature | 200 to 230 | °C | |
| Barrel front temperature | 200 to 230 | °C | |
| Processing (melt) temperature | 200 to 240 | °C | |
| Mold temperature | 30.0 to 55.0 | °C | |
| Injection speed | 中等偏快 | ||
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 4h/80°C |
| 3. Rate B (120°C/h), Loading 1 (10 N) |
| 4. Sodium D Line |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |