| About |
|---|
| ZYPEEK® FC327 是钢背轴承专用料 |
| Product Description | |
|---|---|
| Supplier | ZYPEEK |
| Generic | PEEK |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shore D, 23 ℃ | 84 | ISO 868 | |
| tensile strength | |||
| Fracture, 23 ℃ | 90 | MPa | ISO 527 |
| Tensile strain | |||
| Fracture, 23 ℃ | 2 | % | ISO 527 |
| Bending modulus | |||
| 23℃ | 6000 | MPa | ISO 178 |
| bending strength | |||
| Yield, 23 ℃ | 140 | MPa | ISO 178 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shrinkage rate | |||
| MD | 0.8 | % | ISO 294-4 |
| TD | 0.9 | % | ISO 294-4 |
| friction coefficient | 0.15 | GB3960-83 | |
| Volumetric wear | 0.006 | cm³ | GB3960-83 |
| Water absorption rate | |||
| 23℃，24hr | 0.04 | % | ISO 62 |
| Equilibrium, 23 ℃ | 0.3 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 6.5 | kJ/m² | ISO 180/A |
| Notched impact strength of cantilever beam | – | kJ/m² | ISO 180/U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 343 | ℃ | ISO 11357 |
| Tg (starting) | 143 | ℃ | ISO 11357 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |