| About |
|---|
| Zytel®FR50 NC010是一种25％玻璃纤维增强阻燃聚酰胺66树脂，用于注塑成型。 |
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Glass fiber reinforced,Flame Characteristics |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Fracture stress | 177 | MPa | ISO 527 |
| Fracture strain | 2.6 | % | ISO 527 |
| Tensile modulus | 10200 | MPa | ISO 527 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| CTI（3.0mm） | 285 | UL 746A |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.35 mm | V-0 | IEC 60695-11-10 | |
| 0.75 mm | V-0 | IEC 60695-11-10 | |
| 1.50 mm | V-0 | IEC 60695-11-10 | |
| 3.00 mm | V-0 | IEC 60695-11-10 | |
| High-ampere ignition | |||
| 0.75mm | 166 | UL 746A | |
| 1.5mm | 171 | UL 746A | |
| 3.0mm | 187 | UL 746A | |
| High voltage arc tracking rate | 20.3 | UL 746A | |
| Hot wire ignition | |||
| 0.75mm | 300 | UL 746A | |
| 1.5mm | 300 | UL 746A | |
| 3.0mm | 300 | UL 746A |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.61 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD：3.2 mm | % | ||
| TD：3.2 mm | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 10.8 | kJ/m² | ISO 179-1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa | 240 | ℃ | |
| Relative temperature index, electrical | |||
| 0.75mm | 130 | UL 746B | |
| 1.50 mm | 130 | UL 746B | |
| 3.00 mm | 130 | UL 746B | |
| Relative temperature index, impact | |||
| 0.75 mm | 105 | UL 746B | |
| 1.50 mm | 115 | UL 746B | |
| 3.00 mm | 115 | UL 746B | |
| Relative temperature index, intensity | |||
| 3.00 mm | 120 | UL 746B |
| Process Conditions | |||
|---|---|---|---|
| injection molding | Nominal value | Unit | Test method |
| Melt temperature range | 280-300 | °C | |
| Optimal melt temperature | 290 | °C | |
| Mold temperature range | 70-120 | °C | |
| Optimal mold temperature | 100 | °C | |
| Drying time, dehumidifier dryer | 2-4 | h | |
| Drying temperature | 80 | °C | |
| Processing moisture content | <0.20 | % | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |