Zytel® HTN 51G35HSL NC010

About
35% Glass Reinforced, PPA, High Performance Polyamide&&

Product Description
Supplier	Celanese
Material Status	Commercial: Active
Features	Heat Stabilized,HB
Availabilitys	Asia Pacific,Africa & Middle East ,Latin America,Europe,North America
Process Methods	Injection Molding

MECHANICAL	Nominal value	Unit	Test method
Tensile Modulus
Dry	11730	MPa	ISO 527
Wet Cond	11730	MPa	ISO 527
Creep, 1h	11040	MPa	ISO 527
Creep, 1000h	9522	MPa	ISO 527
Tensile Stress
Broken BRK, dry dry	207	MPa	ISO 527
Broken BRK, wet Cond	207	MPa	ISO 527
Tensile Strain
Broken BRK, dry dry	2.4	%	ISO 527
Broken BRK, wet Cond	2.2	%	ISO 527
Flexural Modulus
Dry	10281	MPa	ISO 178
Wet Cond	10281	MPa	ISO 178
Flexural Strength
Dry	300.15	MPa	ISO 178
Wet Cond	290.49	MPa	ISO 178
Rockwell hardness
M	108		ISO 2039-2
R	124		ISO 2039-2
Poisson’s ratio
Dry	0.33
Wet Cond	0.33
Frictional coefficient	0.35		ASTM D1894

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23 ℃, dry	60.9	kJ/m²	ISO 179/1eU
23 ℃, moist cond	54.6	kJ/m²	ISO 179/1eU
-30 ℃, dry	60.9	kJ/m²	ISO 179/1eU
-30 ℃, moist cond	50.4	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength
23 ℃, dry	10.9	kJ/m²	ISO 179/1eA
23 ℃, moist cond	10.9	kJ/m²	ISO 179/1eA
-30 ℃, dry	10.1	kJ/m²	ISO 179/1eA
-30 ℃, moist cond	10.1	kJ/m²	ISO 179/1eA
-40 ℃, dry	10.9	kJ/m²	ISO 179/1eA
Izod Notched Impact strength
23 ℃, dry	11	KJ/m²	ISO 180/1A
23 ℃, moist cond	11	KJ/m²	ISO 180/1A
-30 ℃, dry	10	KJ/m²	ISO 180/1A
-30 ℃, moist cond	10	KJ/m²	ISO 180/1A
Izod Unnotched Impact strength of cantilever beam
-30 ℃, dry	50	KJ/m²	ISO 180/1U
-30 ℃, moist cond	40	KJ/m²	ISO 180/1U

THERMAL	Nominal value	Unit	Test method
Melting temperature
	300	℃	ISO 11357-3
	300	℃	ISO 11357-3
Hot deformation temperature HDT
1.8 MPa	265	℃	ISO 75-1/-2
0.45 MPa	282	℃	ISO 75-1/-2
Vicat Softening Temperature	288	℃	ISO 306/B
Coeff. of linear thermal expansion
parallel，-40-23℃	0.1	E-4/℉	ISO 11359-2
parallel	0.1	E-4/℉	ISO 11359-2
normal，-40-23℃	0.306	E-4/℉	ISO 11359-2
normal	0.306	E-4/℉	ISO 11359-2
Thermal conductivity	0.25	W/m/K
Melt Specification. heat capacity of melt	0.692	BTU/(lb·F)
Relative Temperature Index (RTI)
electrical
0.75 mm	150	℃	UL-746B
1.5 mm	150	℃	UL-746B
3.0 mm	150	℃	UL-746B
impact
0.75 mm	125	℃	UL-746B
1.5 mm	125	℃	UL-746B
3.0 mm	130	℃	UL-746B
strength
0.75 mm	130	℃	UL-746B
1.5 mm	140	℃	UL-746B
3.0 mm	150	℃	UL-746B

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame Class Rating
1.5 mm	HB	calss	UL 94
1.8 mm	HB	calss	UL 94
Oxygen Index	24	%	ISO 4589-2
Glow Wire Flammability Index (GWFI)
0.75 mm	749	℃	IEC 60695-2-12
1.5 mm	749	℃	IEC 60695-2-12
3.0 mm	960	℃	IEC 60695-2-12
Glow Wire Ignitability Temperature (GWIT)
1.5 mm	776	℃	IEC 60695-2-13
3.0 mm	79.8	℃	IEC 60695-2-13
FMVSS flame retardant rating			FMVSS 302
1 mm	23	mm/min	FMVSS 302

ELECTRICAL	Nominal value	Unit	Test method
Relative permittivity
100 Hz	4		IEC 62631-2-1
1MHz	4		IEC 62631-2-1
Dissipation Factor
1MHz	120	E-4	IEC 62631-2-1
1GHz	120	E-4	IEC 62631-2-1
Volume Resistance
Dry	>1E13	ohm·m	IEC 62631-3-1
Wet Cond	1E13	ohm·m	IEC 62631-3-1
Surface Resistivity	1E14	ohm
Electric strength
Dry	36	kV/mm	IEC 60243-1
Wet Cond	36	kV/mm	IEC 60243-1
Compared Tracking Index
Dry	600	V	IEC 60112
Wet Cond	600	V	IEC 60112
Dielectric Constant	3.9		IEC 60250

Notes
1. Typical properties: these are not to be construed as specifications.
2. First Heat
3. FMVSS 302
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.