Zytel® Nylon 74G33J Resin

About

Product Description
Supplier	DuPont
Generic	PA66/6
Material Status	Commercial: Active
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.39	g/cm³	ISO 1183
Shrinkage rate
TD	0.8	%	ISO 294-4
MD	0.2	%	ISO 294-4

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	184	MPa	ISO 527-1/-2
Tensile modulus	9300	MPa	ISO 527-1/-2
Tensile strain
fracture	3.3	%	ISO 527-1/-2
bending strength	288	MPa	ISO 178
Bending modulus	9070	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	95	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength
23℃	25	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.80 MPa	225	℃	ISO 75-1/-2

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level
1.5 mm	HB	IEC 60695-11-10
0.8 mm	HB	IEC 60695-11-10
FMVSS	B	ISO 3795

Process Conditions
injection molding	Nominal value	Unit	Test method
drying temperature	85	℃
Drying time	3-4	hrs
Melt processing temperature	290-310	℃
Mold temperature	65-120	℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.