| About |
|---|
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Shrinkage rate | |||
| (Dry)，（Flow） | 0.30 | % | ISO 294-4 |
| Density | |||
| (Dry) | 1.50 | g/cm³ | ISO 1183 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| (Dry) | 263 | ℃ | ISO 3146 |
| Heat deformation temperature/A | |||
| 1.80 Mpa, unannealed (Dry) | 250 | ℃ | ISO 75A-1, -2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile stress at fracture point | |||
| (Dry) | 185 | MPa | ISO 527-1, -2 |
| Tensile strain at fracture point | |||
| (Dry) | 2.8 | % | ISO 527-1, -2 |
| Tensile modulus | |||
| (Dry) | 10300 | MPa | ISO 527-1, -2 |
| Bending modulus | |||
| (Dry) | 9200 | MPa | ISO 178 |
| bending strength | |||
| (Dry) | 270 | MPa | ISO 178 |
| Charpy notch impact strength | |||
| (Dry) | 11.0 | kJ/m² | ISO 179 |
| Non notch impact strength | |||
| (Dry) | 70.0 | kJ/m² | ISO 180 |
| Notch impact strength | |||
| (Dry) | 13.0 | kJ/m² | ISO 180 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |