| About |
|---|
| Zytel®74G33LNC010是33%玻璃纤维增强尼龙66和尼龙6的共融树脂, 该树脂具有与玻璃增强尼龙66相媲美的性能，改善了表面光泽。 |
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | PA66/6 |
| Material Status | Commercial: Active |
| Features | Self-lubricating,Good wear resistance |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | |||
| DAM | 186 | Mpa | ASTM D 638 |
| 50%RH | 121 | Mpa | ASTM D 638 |
| Fracture stress | |||
| DAM | 185 | Mpa | ISO 527-1/-2 |
| 50%RH | 112 | Mpa | ISO 527-1/-2 |
| Tensile strain | |||
| Fracture, dry state | 4 | % | ASTM D638 |
| Fracture, 50% RH | 7 | % | ASTM D638 |
| Fracture strain | |||
| DAM | 3.5 | Mpa | ISO 527-1/-2 |
| 50%RH | 7 | Mpa | ISO 527-1/-2 |
| Tensile modulus | |||
| DAM | 10000 | Mpa | ISO 527-1-2 |
| 50% RH | 6000 | Mpa | ISO 527-1-2 |
| Bending modulus | |||
| DAM | 8800 | Mpa | ISO 527 |
| DAM | 8965 | Mpa | ASTM D790 |
| 50% RH | 5100 | Mpa | ISO 527 |
| 50% RH | 4830 | Mpa | ASTM D790 |
| Bending strength | |||
| DAM | 290 | Mpa | ASTM D 790 |
| Notch free impact | |||
| DAM | 1330 | J/m | ASTM D 4812 |
| 50%RH | 1385 | J/m | ASTM D 4812 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，DAM | 14 | kJ/m² | ISO 180-1A |
| 23℃，50%RH | 20 | kJ/m² | ISO 180-1A |
| -40℃，DAM | 10 | kJ/m² | ISO 180-1A |
| -40℃，50%RH | 10 | kJ/m² | ISO 180-1A |
| -30℃，DAM | 11 | kJ/m² | ISO 180-1A |
| -30℃，50%RH | 10 | kJ/m² | ISO 180-1A |
| Charpy Unnotch Impact strength | |||
| 23℃，DAM | 85 | kJ/m² | ISO 179/1eU |
| 23℃，50%RH | 100 | kJ/m² | ISO 179/1eU |
| -30℃，DAM | 70 | kJ/m² | ISO 179/1eU |
| -30℃，50%RH | 65 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| 23℃，DAM | 12 | kJ/m² | ISO 179/1eA |
| 23℃，50%RH | 18 | kJ/m² | ISO 179/1eA |
| -40℃，DAM | 10 | kJ/m² | ISO 179/1eA |
| -40℃，50%RH | 10 | kJ/m² | ISO 179/1eA |
| -30℃，DAM | 10 | kJ/m² | ISO 179/1eA |
| -30℃，50%RH | 10 | kJ/m² | ISO 179/1eA |
| Notched impact strength of cantilever beam | |||
| 23℃，DAM | 100 | kJ/m² | ISO 180-1U |
| 23℃，50%RH | 100 | kJ/m² | ISO 180-1U |
| -30℃，DAM | 95 | kJ/m² | ISO 180-1U |
| -30℃，50%RH | 65 | kJ/m² | ISO 180-1U |
| Izod notched impact strength | |||
| DAM | 135 | J/m | ASTM D265 |
| 50%RH | 185 | J/m | ASTM D265 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |