About Product Description Supplier Toray Material Status Commercial: Active Availabilitys North America,Europe,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.67 g/cm³ ISO 1183 Shrinkage rate Internal Method TD 0.80 % Internal Method MD 0.20 % Internal…
About Fortron® 1131L4 ITT is a Polyphenylene Sulfide (PPS) product filled with 30% glass fiber. It is available in Africa & Middle East, Europe, Latin America, or North America. Primary characteristic: flame rated.&& Product Description Supplier Celanese Generic PPS Material…
About Starex TX-0520 is a Methyl Methacrylate / ABS (MABS) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Appliances. Primary characteristic: flame rated.&& Product Description Supplier SAMSUNG Generic ABS…
About Product Description Generic EVA Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About ATTANE™ 4607G 超低密度聚乙烯共聚物在流延薄膜中是作为表层薄膜，具有优异的低温热粘性能以及卓越的抗撕裂强度和抗冲击强度。在拉伸薄膜应用中， ATTANE™ 4607G 超低密度聚乙烯共聚物展现出优异的拉伸性能以及良好的物理性能和粘附性能。ATTANE™ 4607G 超低密度聚乙烯共聚物可用于吹塑薄膜的共挤出工艺，在此工艺中，该产品与其他树脂混配后所具有的优异的膜泡稳定性使得ATTANE™ 4607G 超低密度聚乙烯共聚物可作为薄膜多层结构中的一种密封剂。 应用领域： 流延拉伸薄膜中的粘附层 流延薄膜和吹塑薄膜中的密封剂 符合以下法规要求： 欧盟EU， No 10/2011 美国食品和药品管理局U.S. FDA FCN 741 请查阅法规以获取详尽资料。&& Product Description Supplier DOW Generic VLDPE Material Status Commercial: Negative Availabilitys Europe Technical Data PHYSICAL Nominal value…
About Provides improved cling in one-sided cling applications It has improved toughness and optical properties Complies with: Canadian HPFB No Objection (with limitations) EU, No 10/2011 U.S. FDA CFR 176.170(c) U.S. FDA FCN 424 Consult the regulations for complete details.&&…
About LUCENE™ LC168 is an ethylene-1-butene copolymer produced using LG Chem’s metallocene polymerization catalyst and solution process technology. LUCENE™ LC168 is an excellent impact modifier for plastics and offers unique performance capabilities for compounded products. Applications General purpose thermoplastic elastomer…
About SEC 39001 Specialty Ethylene Copolymer is an ethylene butene copolymer, offers excellent processing and performance in various applications such as footwear and wire & cable. Main Characteristics: Pellet form Excellent processability Applications: Foam application Halogen free flame retardance (HFFR)…
About 台塑烯 EVA 7470K 为高压制程所生产的乙烯 / 醋酸乙烯酯共聚物。 7470K 为电线电缆专用料，具有优异的加工性、制品弹性、高可挠性、透明柔软性等。 7470K主要用于低烟无卤电缆线，亦可用于交联发泡板、吸震材料、混掺色母料、押出建材等。 Product Description Supplier fpc-tw Generic EVA Material Status Commercial: Active Features Good flexibility,Crosslinked,High elastic,Optical performance,Copolymer Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.948 g/cm³…
About ELITE™ 5400G Enhanced Polyethylene Resin is a copolymer produced via INSITE™ Technology from Dow. It offers a unique combination of low seal initiation, moderate stiffness and low blocking tendencies for good performance on automated packaging equipment. For food and…
About ELITE™ 5815P is produced via INSITE™ Technology from Dow. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, hot tack strength and good taste and odor performance.…
About ELITE™ 5815 is produced via INSITE™Technology from Dow. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, hot tack strength, and good taste and odor performance. Monolayer…
About SEETEC VC590 resin is produced by ExxonMobil Chemical’s autoclave process technology. SEETEC VC590 resin, with 28% VA content, is an excellent raw material in the application of wire & cable.&& Product Description Supplier LOTTE Generic EVA Material Status Commercial:…
About Medium-low viscosity, high strength, moderate toughness improved grade.F25-03HT is suited for application that is required of moderate toughness or noise reduction.&& Product Description Supplier Korea Engineering Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Good Rigidity,Good flexibility,Good wear resistance…
About Polypropylene homopolymer. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(1)(i) and (c)1.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets…
About Ixef® 1002 is a 30% glass-fiber reinforced, general purpose polyarylamide compound which exhibits high strength and rigidity, outstanding surface finish, and excellent creep resistance. Black: Ixef® 1002/9008 Natural: Ixef® 1002/0008 Custom colorable&& Product Description Supplier Solvay Generic Paraformaldehyde Material…
About Injection Molding CHARACTERISTICS: High impact strength, Good stiffness&& Product Description Generic PP copolymer Material Status Commercial: Active Features Impact copolymer,HB Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.900 g/cm³…
About Product Description Supplier TEIJIN Generic PC+ABS Material Status Commercial: Negative Features V-1,V-0,HB,V-2,High liquidity,Flame Characteristics,Halogen free,5VB Availabilitys Latin America,Asia Pacific,Africa & Middle East ,North America,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.18 g/cm³…
About PC/ABS polymer alloy, Non-halogen type flame resistant series&& Product Description Supplier TEIJIN Generic PC+ABS Material Status Commercial: Active Features V-1,V-0,HB,V-2,High liquidity,Flame Characteristics,Halogen free,5VB Availabilitys Latin America,Asia Pacific,Africa & Middle East ,North America,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About Product Description Supplier Chang Chun Generic polybutylene terephthalate Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of…