About ARLEN™ E630N by Mitsui Chemicals is a modified polyamide 6T reinforced with 30% glass fiber. Possesses high dimensional stability, high melting point, high rigidity and minimum water absorption. Exhibits good chemical and heat resistance. Is suitable for processing by…
About Product Description Supplier Mitsui Generic PA 6T Material Status Commercial: Active Features Good Dimensional Stability,Solvent resistance Technical Data PHYSICAL Nominal value Unit Test method Density 1.63 ASTM D792 Shrinkage rate MD 0.3 % ASTM D955 TD 0.7 % ASTM…
About UR, PBT+PC alloy. Outstanding low temperature impact/chemical resistance.&& Product Description Supplier SABIC Generic PC+PBT Material Status Commercial: Active Features Solvent resistance,low-temperature impact resistance,HB Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About 20% Glass Reinforced, Heat Stabilized, Flame Retardant (halogen- phosphorous-free)&& Product Description Supplier DSM Generic PA6 Material Status Commercial: Active Features Halogen free,Flame Characteristics,Low to no phosphorus content,Heat Stabilized,V-2 Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About Light guiding, Standard&& Product Description Supplier Idemitsu Generic Polycarbonate Material Status Commercial: Active Features V-2 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³…
About Ultradur B 4300 G6 FC Aqua is a easy flowing injection molding food and drinking water contact PBT with 30% glass fiber reinforcement for rigid, tough, and dimensionally stable parts.&& Product Description Supplier BASF Generic polybutylene terephthalate Material Status…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Melt index 300℃，1.2KG 5.66 g/10min ASTM D1238 optical performance Nominal value Unit Test method Transmittance 2 mm 89.30 % ASTM D1003 MECHANICAL Nominal…
About Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT – supplied as a dusted…
About Ultradur B 4300 G4 FC is a easy flowing injection molding food contact PBT with 20% glass fiber reinforcement for rigid, tough, and dimensionally stable parts.&& Product Description Supplier BASF Generic polybutylene terephthalate Material Status Commercial: Active Features Good…
About Injection molding grade with 30% glass fiber reinforcement and very high transmission for laser light in the wavelength range of 800 to 1100 nm. Suitable for manufacturing technical parts, e.g. covers that are welded to a housing by laser…
About Unreinforced Medium Viscosity Polybutylene Terephthalate&& Product Description Supplier DuPont Generic polybutylene terephthalate Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data MECHANICAL Nominal value Unit Test method…
About 30% Glass Reinforced Polyethylene Terephthalate&& Product Description Supplier DuPont Generic PET Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.56 g/cm³…
About Description HJ730L is a highly isotactic Homo PP(HIPP) with high crystal-ine properties compared to normal Homo PP. The product’s crystalline properties have enhanced its strength and heat resistance. HJ730L is highly useful for use in electrical/electronic appliances and high…
About Product Description Generic Copolymer Polyformaldehyde Material Status Commercial: Negative Features High Viscosity Technical Data PHYSICAL Nominal value Unit Test method Density 1.41 g/cm³ ASTM D792 Water absorption rate 23℃，60%RH 0.22 % ASTM D570 Melt Flow Rate 9 g/10min ASTM…
About Product Description Supplier Polyplastics Generic Copolymer Polyformaldehyde Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 190℃，2.16kg 8.9 g/10min ISO 1133 MECHANICAL Nominal value Unit Test method tensile strength…
About Product Description Supplier Polyplastics Generic Copolymer Polyformaldehyde Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…
About XAREC™ C832 is a Syndiotactic Polystyrene (SPS) product filled with 30% glass fiber. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame…
About Product Description Supplier Celanese Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Good Rigidity,Chemical coupling,Copolymer,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.41 g/cm³ ISO 1183 Melt Volume…
About Product Description Supplier Idemitsu Generic Polycarbonate Material Status Commercial: Active Features Good stripping performance Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate MD：1.6 mm 0.5 ~ 0.7 % ISO 294 Density 1.20 g/cm³ ISO 1183 B Melt…
About Product Description Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.96 ISO 1183 Water absorption rate 0.02 % ISO 62 Mold shrinkage rate MD 0.3 % ISO 294-4 TD 0.6 % ISO 294-4 MECHANICAL…