About Product Description Material Status Commercial: Negative Technical Data MECHANICAL Nominal value Unit Test method tensile strength 50mm/min 318 kg/cm² ASTM D638 bending strength 15mm/min 627 kg/cm² ASTM D790 Bending modulus 15mm/min 18000 kg/cm² ASTM D790 Rockwell hardness 90 R…
About TAIRILAC® WE8100 is an Acrylonitrile Styrene Acrylate (ASA) product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Primary characteristic: reach compliant.&& Product Description Generic ASA Material Status Commercial: Active Availabilitys North…
About Product Description Generic PC+ABS Material Status Commercial: Negative Process Methods Injection Molding Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of…
About 30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.&& Product Description Supplier SABIC Generic Polyetherimide Material Status Commercial: Active Features V-0,5VA Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Product Description Generic Polycarbonate Material Status Commercial: Active Features Good stripping performance Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 300℃，1.2kg 12 cm³/10min ISO 1133 Tensile molding shrinkage rate flow 0.5 – 0.7 % SABIC 方法…
About Product Description Supplier INEOS Material Status Commercial: Negative Features Good Rigidity,Moderate liquidity,Good surface appearance Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 220℃，10 kg 24 cm³/10min ISO 1133 IMPACT Nominal value Unit…
About Product Description Supplier INEOS Material Status Commercial: Negative Features Good Rigidity,Moderate liquidity,Good surface appearance Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 220℃，10 kg 22 cm³/10min ISO 1133 IMPACT Nominal value Unit…
About Product Description Supplier NHU Material Status Commercial: Negative Features Solvent resistance,Flame Characteristics,High Viscosity Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1360 kg/m³ ISO 1183 Forming shrinkage rate TD 1.2 % MD 1.8…
About Radel® R-5000 is a transparent polyphenylsulfone (PPSU) which offers exceptional hydrolytic stability, and toughness superior to other commercially-available, high-temperature engineering resins. This resin also offer high deflection temperatures and outstanding resistance to environmental stress cracking. Radel® polymers are inherently…
About 高流动,易脱模型・ 冰色 Product Description Supplier Idemitsu Generic Polycarbonate Material Status Commercial: Active Features High liquidity,Good stripping performance Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method Tensile (yield) strength 65 MPa ISO 527-1 Tensile strain fracture 95…
About Heat Stabilized, Lubricated&& Product Description Supplier DSM Generic PA 46 Material Status Commercial: Active Features Lubricating,Heat Stabilized Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.18 g/cm³ ISO 1183 Shrinkage rate ISO 294-4…
About 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.&& Product Description Supplier SABIC Generic Polyetherimide Material Status Commercial: Active Features ECO,V-0,5VA Availabilitys North America,Asia Pacific,Europe Process Methods Injection…
About Amodel® AS-4133 HS is a 33% glass reinforced, lubricated, heat stabilized grade of polyphthalamide (PPA) that offers fast cycle times and moldability in hot water molds. Testing conducted on samples dry as molded and samples conditioned to 50% relative…
About Luran® 368R is a general purpose grade of SAN with well-balanced properties, suitable for injection molding and extrusion. It features very good transparency, good heat resistance and very good dimensional stability. FEATURES Excellent transparency Good surface appearance Good chemical…
About Ryton® R-7-120NA and R-7-120BL glass fiber and mineral filled polyphenylene sulfide compounds provide good strength and low maintenance molding using conventional molding equipment.&& Product Description Supplier Solvay Generic PPS Material Status Commercial: Active Features Good Rigidity Availabilitys North America,Latin…
About Ryton® R-4-230NA and R-4-230BL 40% glass fiber reinforced polyphenylene sulfide compounds provide reduced flash and improved processability compared to other polyphenylene sulfide injection molding compounds.&& Product Description Supplier Solvay Generic PPS Material Status Commercial: Active Features Excellent Processability Availabilitys…
About High heat PC/ABS blend offering good flow and excellent impact. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI).&& Product Description Supplier SABIC Generic PC+ABS Material Status Commercial: Active Features High impact…
About XENOY X4830 is a hydrostable, high modulus, low temperature ductile PC/PBT blend. Furthermore, this resin provides high chemical resistance, very low creep, low CTE, excellent fatique and high heat dimensional stability. The X4830 could be positioned for body panels,…
About Grivory® GVX-5 H black 9915 is a Polyamide 66 + PA 6I/X (Nylon 66+Nylon 6I/X) material filled with 50% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion…
About Leona™ 1502S is a Polyamide 66 (Nylon 66) product. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Leona™ 1502S include automotive, engineering/industrial parts, industrial applications and sheet. Characteristics include: Heat Resistant…