About Product Description Supplier Kingfa Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 230℃，2.16 kg 1500 g/10min GB/T 3682 Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd.…

About SABIC® STAMAX 60YK270E is a Polypropylene product filled with 60% long glass fiber. It can be processed by injection molding and is available in Europe. Typical application: Automotive.&& Product Description Supplier SABIC Generic PP not specified Material Status Commercial:…

About Product Description Supplier Kingfa Generic PP not specified Material Status Commercial: Negative Features Good Rigidity,Heat Resistance, Good Availabilitys North America,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.18 g/cm³ ASTM D792 Shrinkage rate 23℃ 0.80 to…

About HOPELEN B-111是均聚聚丙烯树脂，该等级可用于片材挤出加工。 高强度，耐热性和透明性的特点可以得到优异性能的最终产品。 Product Description Supplier LOTTE Generic PP not specified Material Status Commercial: Active Features Good Rigidity,Good Clarity,Heat Resistance, Good Technical Data PHYSICAL Nominal value Unit Test method Density 0.90 g/cm³ ASTM D792 Melt index 0.5 g/10min ASTM…

About Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer…

About TIPP TI-620是一种用于吹塑成型的聚丙烯，它具有良好的加工性，高透明度，优异的冲击强度，良好的耐化学性和抗应力白化性。 它可用于透明瓶，清洁剂和化妆品瓶，文具和食品包装。 它是一种“不含邻苯二甲酸盐”的树脂。 Product Description Supplier LOTTE Generic PP not specified Material Status Commercial: Active Features Excellent Processability,Good Clarity,High impact resistance,Solvent resistance Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ ASTM D792…

About SABIC® STAMAX 40YM240 is a 40% long glass fiber reinforced grade. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength.&& Product Description Supplier SABIC Generic PP not specified Material Status Commercial: Active…

About Product Description Generic PP not specified Material Status Commercial: Active Features Heat Resistance, Good,HB Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.12 g/cm³ GB/T 1033 Melt Flow Rate 230℃，2.16kg 4 g/10min GB/T 3682…

About SABIC® PPcompound 8611P is a mineral filled, impact modified polypropylene TPO. This material combines scratch resistance and good flow with exterior automotive weathering stability. It was originally designed for painted or unpainted automotive bumper fascia applications where a combination…

About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 32.0-36.9 g/10min SH/T 1761.1-2008 Isometric index 实测 % SH/T 1761.1-2008 ash content ＜350 mg/kg SH/T 1761.1-2008 Apparent density…

About Product Description Supplier SUQING Generic PP not specified Material Status Commercial: Active Features Low odor,Melt Folw Index stable Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 230℃，2.16kg 1530 g/10min GB/T 3682 melting point 10℃/min 160 ℃…

About 30% Glass reinforced&& Product Description Supplier Ginar Technology Generic PP not specified Material Status Commercial: Negative Features HB Availabilitys Africa & Middle East ,North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…

About Aramco PP HP30EG是一种均聚聚丙烯树脂，通常用于双轴取向薄膜的挤出。 由这种树脂制成的薄膜通常表现出优异的光学性能，优异的机械和防潮性能。 该产品易于加工，通常适用于高速BOPP生产线。典型应用 食品包装，印刷层压，胶粘带，卷烟包装，金属化膜。 本产品不适用于医疗和制药应用。 Product Description Supplier Aramco Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 230℃，2.16kg 3.0 g/10min ASTM D1238 Density 0.9 g/cm³ ASTM…

About Product Description Supplier LOTTE Generic PP not specified Material Status Commercial: Active Features Solvent resistance,Gamma radiation,Excellent Processability,Good Clarity,High impact resistance Availabilitys North America,Europe,Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.900 g/cm³…

About SABIC® PPCOMPOUND G3220A is a general purpose, 20% glass filled, chemically coupled, heat stabilized homopolymer polypropylene compound. The IMDS is 209767996.&& Product Description Supplier SABIC Generic PP not specified Material Status Commercial: Active Features Quick molding cycle,Chemical coupling,Heat Stabilized,Homopolymer…

About Product Description Generic PP not specified Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Tensile yield strength 360 ≥ Tensile yield strength 10 ≥,Mpa Bending modulus 16000 Kg/cm² impact strength 2.9 kg.cm/cm Rockwell hardness 95…

About Description General Purpose Application Electrical & Electronic, Automotive Parts&& Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Features Good surface appearance,High impact resistance,Solvent resistance,HB Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test…

About 20%玻纤增强，高刚性，低收缩，高机械强度，耐热性。纱管，泵浦外壳，控制器外壳，家电 产品零件，风扇叶片等。 强化 PP 因具有价格低廉、成形容易、机械强度均衡、电气性质优良、耐水、耐热水性 优良等特性。但是在不同的产品结构设计与肉厚下，强度、配向性、收缩率、产品翘曲 度等影响更需考虑。 Product Description Supplier Nan Ya Generic PP not specified Material Status Commercial: Active Features Good Electrical Properties,Low or no water absorption,Quick molding cycle,Low density,Heat Resistance, Good,Good Rigidity Availabilitys Asia Pacific Technical Data…

About AKROLEN® PP GFM 25/15 black 950088 (1415) is a 25% glass fibre reinforced, 15% mineral-filled polypropylene with good surface and dimensional stability Applications are mainly thin wall housings for electronic parts in the automotive industry with operation temperatures up…

About RANPELEN J-595K是一种用于注塑成型的成核无规共聚物。 该等级适用于在传统注塑设备中加工，具有超强的透明度，良好的机械平衡，高光泽，成型周期短和超高流动性。 J-595K是一种“不含邻苯二甲酸盐”的产品。 Product Description Supplier LOTTE Generic PP not specified Material Status Commercial: Active Features Good Clarity,Good surface appearance,Quick molding cycle Technical Data PHYSICAL Nominal value Unit Test method Density 0.90 g/cm³ ASTM D792 Melt index 70…