About Kingfa PA66-G60 HMBK002 is a Polyamide 66 (Nylon 66) material filled with 60% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa PA66-G60 HMBK002 are: Flame Rated Good Dimensional Stability…
About HiFill® POM 0169 B LE is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in North America. Primary characteristic: copolymer.&& Product Description Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Low extract,Copolymer,Metal…
About Polyacetal copolymer, reduced emission Easy flowing Injection molding type like C 13021 XAP, but with higher strength, rigidity and hardness over the entire permissible temperature range for HOSTAFORM; good chemical resistance to solvents, fuel and strong alkalis as well…
About A compatibilizer used to bond immiscible polymers used for toughened, filled and blended compounds.&& Product Description Generic 苯乙烯+环氧树脂 Material Status Commercial: Active Availabilitys North America,Latin America,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.05 g/cm³ ASTM D792…
About Formed from cellulose (plant) fibres, Zelfo processed materials are self-binding and non toxic, with properties that are modifiable as required by the end user. Bio-binder: Zelfo engineered fibre has multiple uses as a bio-binder in newly developed products as…
About Rotuba CAP CP808 (16% Plasticizer) is a Cellulose Acetate Propionate (CAP) product. It can be processed by injection molding and is available in North America. Applications of Rotuba CAP CP808 (16% Plasticizer) include containers, handles and optics Characteristics include:…
About PS serial composite sheet: this plastic has long history in use, its produce techniche is very perfect. It has high transparence, good rigidity, also be slippery, easy-colored. Meanwhile, it can prevent the moisture, and resist the chemical causticity. But…
About This autoclave LDPE homopolymer is tailored for applications that require: Excellent flexibility Excellent flow Good warpage resistance Typical injection molded applications for 1009 include: Large housewares Tamper evident, snap-on caps Feminine hygiene applications This resin meets these specifications: ASTM…
About Medalist MD-16120G XRD1 is a high performance thermoplastic elastomer specifically designed for healthcare and medical applications. Medalist MD-16120G XRD1 is a low hardness, low density, lubricated grade that can be sterilized and is suitable for injection molding.&& Product Description…
About Silopren LSR 2630 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren LSR 2030, Silopren LSR 2630 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to…