About Med/high flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable. Contains a higher amount of release than HP2EU.&& Product Description Supplier SABIC Generic Polycarbonate Material Status…
About 食品杂货袋，服装包装，农业薄膜和其他通用薄膜应用。高强度薄膜，具有优异的加工性，高滑爽性和防粘连性。 为了获得更高的透明度，建议与LDPE混合。 Product Description Supplier Sumitomo Generic Linear low density polyethylene Material Status Commercial: Active Features Excellent Processability,Smoothness Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 2.16kg 2.2 g/10min ASTM D1238 Density 0.923 g/cm³ ASTM D792‐A…
About Features: High gloss, weather stable Applications: Prosucts demanding for gloss: Sweeper, Wasshing machine cover etc&& Product Description Supplier Kumho Petrochemical Material Status Commercial: Active Features Good surface appearance,HB,Weather resistance is good Availabilitys Europe,Asia Pacific,North America Technical Data PHYSICAL Nominal…
About Staramide RF006EU an UV stabilized Glass Fiber Reinforced Polyamide 66 / Polyamide 6 Injection Molding Resin (also known as Staramide 66 C 30V S4)&& Product Description Generic PA66/6 Material Status Commercial: Active Features Weather resistance is good Availabilitys Africa…
About TR COMPOUND, RESISTENT TO UV RADIATION, ADDITIVATED WITH ESSENCE AND RUBBER RECOMMENDED FOR INJECTION IN GENERAL.&& Product Description Generic PVC, not specified Material Status Commercial: Negative Features Weather resistance is good Availabilitys Latin America Process Methods Injection Molding Technical…
About (DOMAMID 6G50FC) Polyamide 6, 50% glass fiber reinforced, food contact compliant, for injection moulding&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features Food contact compliance Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About B26E730 is a Polyethylene EBA Copolymer for Blown film Benefits & Features B26E730 is an Ethylene Butyl Acrylate (EBA) copolymer, containing 11% butyl acrylate. Applications B26E730 has been developed to give a very strong and tough film with excellent…
About LNP* STAT-KON* LX00486C is a compound based on Polyetheretherketone containing proprietary fillers. Added features of this grade includes: Clean Compound System, Electrically Conductive.&& Product Description Supplier SABIC Generic PEEK Material Status Commercial: Active Features Conductive,Low (to None) Ion Content…
About Pearlthane® 12H92E is a special polyester-based TPU, supplied in form of translucent, colourless pellets, combining hardness with excellent processability and excellent low temperature performance. This grade has been specially designed for mechanically demanding applications where excellent mechanical properties are…
About High heat resistance ABS ISO shortname: ISO 2580-1 ABS 1-M, MG, 105-15-16-20 Major Benefits: Excellent balance of impact strength and flowability Super low emission grade Lower mould deposits in injection molding processing applications Better dimensional under heat Chemical Composition:…