About PA66/Polypropylene Alloy 30% Glass Fiber Reinforced for Injection Moulding applications.&& Product Description Supplier Ram-On Generic PA 66+PP Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About ADMER™ NF508E is a maleic anhydride grafted, LLDPE-based grade, which is designed for adhesion between PE and PA or EVOH in tube, sheet, blown and cast film and especially double-bubble applications. Product Description Supplier Mitsui Generic MAH-g-PE增容剂 Material Status…
About Flexirene MS 40 DA is a linear low density polyethylene (LLDPE) with antioxidants, suitable for injection moulding application. Parts made by Flexirene MS 40 DA are characterised by a good balance between impact resistance and rigidity. Flexirene MS 40…
About Abstron IPM3000 is an Acrylonitrile Butadiene Styrene + Acrylic (PMMA) (ABS+Acrylic) product. It is available in Asia Pacific. Characteristics include: Flame Rated High Gloss Scratch Resistant&& Product Description Generic ABS+PMMA Material Status Commercial: Active Features Good surface appearance,High scratch…
About Polypropylene PPH 9040 is a nucleated homopolymer with a Melt Flow Index of 25 g Polypropylene PPH 9040 is characterized by an improved rigidity and a high clarity. Polypropylene PPH 9040 is suitable for the injection moulding of packaging…
About Glass fibre and mineral reinforced partially aromatic polyamide for injection moulding. Good toughness, stiffness and strength, low water absorption, high melting point (295 °C). The product is especially tailored for laser direct structuring (LDS). The structured areas can be…
About NIPOL® NITRILE ELASTOMERS (NBR) are recommended when oil or solvent resistance is needed for the proper functioning of rubber parts. Nipol nitrile elastomers are available in a broad range of acrylonitrile content to ensure optimal performance in a variety…
About FOOTWEAR – BOOT COMPOUNDS Applications TPR UPPER, SOLE SNOW BOOT SHELL, RAINBOOTS&& Product Description Generic TPE Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.03 g/cm³ MECHANICAL Nominal value Unit Test…
About Glass Fiber Reinforced, Engineering Grade Nylon Resin (PA66)&& Product Description Supplier Wellman Generic PA66 Material Status Commercial: Active Features HB Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.51 g/cm³ ISO 1183 Shrinkage…
About MAJORIS HPS G400 – 8229 is a 40 % glass fibre reinforced polyphenylene sulfide, intended for injection moulding. The product is available in black. They combine high mechanical, thermal and electrical properties with excellent chemical and oxidation resistance, lower…