About 50% glass fibres reinforced injection moulding grade with superior mechanical properties, high dimensional stability&& Product Description Generic PA 6/6T Material Status Commercial: Active Features Good Dimensional Stability,Copolymer Availabilitys Europe Process Methods Injection Molding Technical Data Process Conditions injection Nominal…
About The BASF Ultramid® FC (Food Contact) grades enable the industry to develop products for food contact applications which are in compliance with multiple regional food contact regulations including FDA, European Food Contact (EU) Nr. 11/2011 and GMP (EC) n°2023…
About LUVOCOM® 21-8113是一种聚酰胺 6/6T 共聚物（尼龙 6/6T）材料,含有的填充物为碳纤维增强材料。 该产品在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货,。 LUVOCOM® 21-8113的主要特性有: 良好的刚度 耐磨 润滑 典型应用领域包括: 工程/工业配件 纺织/纤维 汽车行业 商业/办公用品&& Product Description Supplier Lehmann Generic PA 6/6T Material Status Commercial: Active Features Good Rigidity,Low coefficient of friction,Lubricating,Good wear resistance Availabilitys Africa & Middle…
About Partially aromatic polyamid, halogen-free flame-retardant, light colorable, outstanding flame retardance, resistant to soldering temperatures&& Product Description Supplier BASF Generic PA 6/6T Material Status Commercial: Negative Features Aromatic,Halogen free,Flame Characteristics Availabilitys Europe Process Methods Injection Molding Technical Data Process Conditions…
About LUVOCOM® 21-8115是一种聚酰胺 6/6T 共聚物（尼龙 6/6T）材料,含有的填充物为碳纤维增强材料。 该产品在亚太地区、北美洲、拉丁美洲、欧洲或非洲和中东有供货,。 LUVOCOM® 21-8115的主要特性有: 润滑 耐磨 良好的刚度 典型应用领域包括: 工程/工业配件 商业/办公用品 汽车行业 纺织/纤维&& Product Description Supplier Lehmann Generic PA 6/6T Material Status Commercial: Active Features Good Rigidity,Low coefficient of friction,Lubricating,Good wear resistance Availabilitys Africa & Middle…
About Product Description Supplier BASF Generic PA 6/6T Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…
About Glass fibre and mineral reinforced partially aromatic polyamide for injection moulding. Good toughness, stiffness and strength, low water absorption, high melting point (295 °C). The product is especially tailored for laser direct structuring (LDS). The structured areas can be…
About Ultramid T KR 4355 G7 BK00564 is a 35% glass fiber reinforced injection molding PA6/6T grade featuring high toughness, stiffness, and strength, low water absorption, and high melting point (295 C). After the material has been conditioned, its mechanical…
About 30% glass fibres reinforced injection moulding grade with superior mechanical properties&& Product Description Generic PA 6/6T Material Status Commercial: Active Features Copolymer Availabilitys Europe Process Methods Injection Molding Technical Data Process Conditions injection Nominal value Unit Test method Drying…
About Partially aromatic polyamide for injection molding and extrusion. High toughness, stiffness and strength, low water absorption, high melting point (295°C).&& Product Description Supplier BASF Generic PA 6/6T Material Status Commercial: Active Features Good Rigidity,Good flexibility,Low or no water absorption,Aromatic,Copolymer…
About Extrusion&& Product Description Supplier DSM Generic PA 6/6T Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method Density 1.14 g/cm³ ISO 1183 Melt Volume…
About Ultramid T KR 4365 G5 is a 25% glass fiber reinforced, flame-retardant, injection molding PA6/6T grade. Good mechanical properties, high tracking resistance, low tendency for deposits on electrical contacts, very resistant to electrolytic corrosion, resistant to solder baths; electroplateable.&&…
About Glass fibre reinforced partially aromatic polyamide for injection moulding. High toughness, stiffness and strength, low water absorption, high melting point (285°C).&& Product Description Supplier BASF Generic PA 6/6T Material Status Commercial: Active Features Good Rigidity,Good flexibility,Low or no water…
About Ultramid T KR 4355 G5 is a 25% glass fiber reinforced injection molding PA6/6T grade featuring high toughness, stiffness, and strength, low water absorption, and high melting point (295 C). After the material has been conditioned, its mechanical properties…
About Extrusion&& Product Description Supplier DSM Generic PA 6/6T Material Status Commercial: Active Features Lubricating Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method Density 1.14 g/cm³ ISO 1183…
About Ultramid T KR 4357 is a 30% glass fiber reinforced, impact-modified, injection-molding PA6/6T grade. High toughness, stiffness and strength, low water absorption. High melting point (295 C). After the material has been conditioned, its mechanical properties remain stable up…
About Glass fibre reinforced partially aromatic polyamide for injection moulding. High toughness, stiffness and strength, low water absorption, high melting point (295°C).&& Product Description Supplier BASF Generic PA 6/6T Material Status Commercial: Active Features Good Rigidity,Good flexibility,Low or no water…
About Glass fibre and mineral reinforced partially aromatic polyamide for injection moulding. Good toughness, stiffness and strength, low water absorption, high melting point (295 °C). The product is especially tailored for laser direct structuring (LDS). The structured areas can be…