About Jackdaw PC DS20WT6701是一种聚碳酸酯+聚丁烯对苯二甲酸酯（PC+PBT）产品,。 它,在欧洲有供货。 主要特性为:阻燃/额定火焰。&& Product Description Generic PC+PBT Material Status Commercial: Active Features HB Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.22 g/cm³ ASTM D792 , ISO 1183 Water absorption rate 24hr 0.50…
About 30% GLASS-FIBER REINFORCED, FLAME RETARDANT POLYAMIDE 6.6 FOR INJECTION MUOLDING APPLICATIONS.&& Product Description Supplier Ram-On Generic PA66 Material Status Commercial: Active Features Flame Characteristics,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data…
About Clariant Nylon 6 PA-221G33 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America for injection molding. Important attributes of Clariant Nylon 6 PA-221G33 are: Flame Rated Chemical Resistant Corrosion Resistant…
About Product Description Supplier BASF Generic TPU-醚 Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Baytec GS-V85A is a two-component, one-shot system that yields a solid polyurethane elastomer. The isocyanate component is an isocyanate-terminated (MDI) polyester prepolymer, and the polyol component is a polyethylene/polybutylene adipate diol. The Baytec GS-V85A system is used in the…
About TRAMID® 4210G50 is a Polyamide product. It is available in Asia Pacific, Europe, or North America.&& Product Description Supplier Samyang Generic PA Not specified Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test…
About AKROMID® B3 2 RM-D natural (3293) is an unreinforced, UV-stabilised polyamide 6 with limited moisture absorption and light inherent colour Interior and exterior parts with very high impact strength in the automotive industry&& Product Description Generic PA 6+ABS Material…
About THERMORUN® 3855B/N is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America for extrusion or injection molding. Primary attribute of THERMORUN® 3855B/N: Low Hardness.&& Product Description Supplier Mitsubishi Generic TPE Material Status Commercial:…
About AKROMID® T1 GF 50 black (3101) is a 50% glass fibre reinforced polyphthalamide with very high rigidity and strength, as well as high temperature and chemical resistance Parts with tight dimensional tolerances even under high mechanical load.&& Product Description…
About Product Description Supplier UENO Generic 液态聚合物 Material Status Commercial: Active Technical Data Electrical performance Nominal value Unit Test method Tensile strength 111 Mpa ASTM D638 Dielectric strength 1 mm 56 kV/mm ASTM D149 PHYSICAL Nominal value Unit Test method…