About Tekniflex® VA series are designed for thermoforming blister packaging for Pharmaceutical products requiring high barrier to moisture. Thermoformable into small/medium cavities; FDA, EU, USP & EP compliant, Pharmaceutical-grade PCTFE film lamination.&& Product Description Generic PVC+PCTFE Material Status Commercial: Active…
About LITEN ZB 29 is a linear polyethylene, copolymer, intended for blow moulding and extrusion. It exhibits resistance to tensoactive substances, impact strength and good processability. It is suitable for manufacture of pipes for non-pressure applications, sheets, profiles, bottles, canisters,…
About Value Product – Glass Fiber – Heat Stabilized&& Product Description Generic PA66 Material Status Commercial: Negative Features Heat Stabilized,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Sinvicomp SMG6500 is a Flexible Polyvinyl Chloride material. It is available in Asia Pacific for injection molding. Important attributes of Sinvicomp SMG6500 are: Food Contact Acceptable Non-Toxic Typical application of Sinvicomp SMG6500: Consumer Goods&& Product Description Supplier Teknor Apex…
About 40% Mineral/Glass-Reinforced Nylon Resin (PA66)&& Product Description Supplier Wellman Generic PA66 Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.49 g/cm³ ISO 1183 Shrinkage rate…
About Product Description Supplier DOMO Generic PA66 Material Status Commercial: Active Features Grease resistance Availabilitys Europe,Africa & Middle East Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.32 g/cm³ ISO 1183/A Shrinkage rate Internal Method…
About Tenite™ cellulosic plastics are noted for their excellent balance of properties – toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder…
About Chemlon® 104 H is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Chemlon® 104 H are: Flame Rated Good Processability Good Toughness Heat Stabilizer High…
About 20% glass reinforced PPE + PS. High heat, high modulus automotive applications like ignition coils.&& Product Description Supplier SABIC Generic PPO(PPE)+PS Material Status Commercial: Active Features High Heat Resistance Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL…
About Acryft® WK402 is an Ethylene Methyl Methacrylate (EMMA) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.&& Product Description Supplier Sumitomo Generic EMMA Material Status Commercial: Active Availabilitys Africa & Middle…